trochiformydrjd.blogspot.com

Divide 4,320 by 144 to convert to square feet: Please note that granite countertops have a 1 ½” standard over hang from the face of the cabinets.


iDecking® install your decking with the foot pressure

Measure along the back edge of cabinetry;

How to measure linear feet for granite countertops. Be sure to account for the length of countertop in a corner only once. We’ll stick with our example assumption of $ 27.00 per foot for a dupont edge. Measure length x width (in inches) and take that total number and divide it by 144.

Professional countertop estimating guide great lakes granite 4 ways to calculate linear feet wikihow how to measure countertops and get it right the first time around how to measure for granite countertops you how to measure countertops in linear feet. For example, say the length of the countertop is 108” and the depth of the standard countertop (on a 24” deep cabinet) is 25 ½”; Kitchen countertops can change the entire look and feel of your kitchen, and can range in price from inexpensive to exorbitant.

To find the linear feet of multiple pieces of lumber, you need to measure the length of each piece and add the measurements together. An average granite slab size is about 9 to 10 feet wide and 5 to 6 feet tall (slabs are displayed vertically). Measure the length of the countertop along its back edge (commonly, this is the edge that is against the wall or backsplash).

If you have an island or a bar top you need to measure the length times the width in inches and divide that by 144. 80”+ 80”+ 40”+ 40”= 240 linear inches / 12 = 20 linear feet. Total edge length (feet) 120” ÷ 12 = 10 ft.

This calculation application will be a great addition to your business project and will speed. Now, we don’t buy these materials by the square inch so we will need to convert that number into square feet. 62.5” x 25” = 1562.5” piece b:

864/144 = 6 square feet. 144 = square footage of your countertops. Same size as a in this case, so 1562.5” piece c:

Example total length (108 + 126 + 25.5) x 4 = 1038 / 144 = 1.8 sq ft. Take measurements of the entire length of each countertop you want covered in granite. Divide that number by 144 and that should give you square feet of granite backsplash needed.

3,744 plus 576 equals 4,320 square inches. Measure each countertop section and record the length and depth dimensions of the sections (in inches, rounded to the nearest inch). Finally, multiply by material cost.

To calculate the area of each countertop section, multiply the length times the width. Counters usually measure 25” or 25 5/16” deep, so make sure you have the right depth for your cabinets and the overhang. So, for a countertop that you figured 20 square feet, you'd actually have 7 more square feet.

For example, if your space is 48″ (width) x 18″ (height) = 864. For our example, because there are no specific measurements listed other than the overall width and length, your linear edgework would be estimated as follows: Follow these steps to measure for countertops.

Take note of the each board’s length and after all measurements are complete, then use a calculator such as our feet and inches calculator to add the feet measurements together. 125” x 25” = 3125” 1562.5” +1562.5” +3125” =6250 square inches. 108” x 25.5” = 2,754 (divide this number by 144) 2,754/144 = 19.12 sq ft.

Use a tape measure to measure the number of linear feet of base cabinets. You need to give an approximate calculation of the countertops’ square footage to receive an estimate for the cost of your new countertops. 125” x 25” = 3125” 1562.5” +1562.5” +3125” =6250 square inches.

If you measure in inches, divide them by 12 to get the linear feet. To calculate how many square feet of countertop you need, measure the linear footage of your current countertop and add 1 ½” overhang at each end. Our technical solution is an excellent guide that helps to determine the final cost based on the correct quotes for the edge profile.

Begin with a scale drawing of your countertop layout or layouts. 30 square feet of granite. The calculator includes installation price, dimensions, length, as well as the type of material such as granite, marble.

Multiply the width and height to find the total area in inches, then divide by 144 to find the amount of square feet needed (amount of inches in a square foot). A typical slab may be 50 square feet but with waste and granite remnants, it may yield only 35 square feet of stone counters. Be sure to measure every.

Start at one end and measure each straight segment of countertop. Example (78″ x 48″)/144 = 26 sq ft. How to measure countertops l shape counter top to measure section a:

Compute the area of each section. Write down the length of each segment as you measure them. For galley kitchens or in island situations, don’t be concerned about scaling the aisle separations.

No matter the budget, you will want to have precise measurements in order to purchase enough countertop material to complete the project properly and without added expense. Divide this number by 144 2500 ¸. Add the two totals together to find total square footage: